50mm ABS 2 Part

50mm ABS 2 Part

Releases tension progressively, avoids the risk of load falling down

Item Number: 2010081
SSAUS ERP Code: 20020D21-0x09
20020D21-09 RATCHET
  • Ratchet tension can be released gradually
  • Self-locking handle and equipped with double slider mechanism
  • Low-stretch, wear-resistant webbing with cord edge protection and marking stripes
  • Fitted with TFI tension force indicator as standard, pre-tensioning force of 500 daN can be achieved and read off

"Anti-Belt-Slip" procedure

Controlled tension liberation

The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.


Tension Force Indicator

Show the pre-tensioning force achieved

With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.


Self-locking ratchet lever

Prevents unintetional opening

The ratchet opening during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.


Double Slider

Safe in the intermediate phase when tensing

Secures in the intermediate stage when tensioning the webbing. Two sliders engage in an existing sprocket in "smaller steps".


Epoxy resin coating

Maximum ratchet protection

Ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.

Product Technical Information

  • Standard Tension Force: 600 daN
  • Webbing Width B: 50
  • Label Protection: Yes
  • Colour: Yellow
  • Webbing Material: 100% Polyester, thermofixed and low-stretch
  • Lashing End Fitting Component: 31523 CK-50
  • Lashing Type: Two-piece
  • Packaging Unit (PU): pcs
  • Packaging Unit (PU) Content: 1
  • Lashing Capacity: 2500 daN
  • Length: 9 m