Your browser doesn't have Flash, Silverlight or HTML5 support.

                    
                    
Gotcha Rescue and Evacuation

Gotcha™ Original Rescue Kit

The Gotcha™ Original was the first pre assembled remote rescue kit. Designed for rescuing a suspended casualty from fall arrest lanyards, rope safety lines and fall arrest blocks, all possible from a point of safety.

Casualties can either be raised or lowered to the nearest point of safety, with casualties initially raised to release their original attachment preventing the need for cutting. The kit comes complete with an anchor sling capable of attaching to a wide range of structures and all terminations are sewn for security.

The kit is adaptable for different heights of anchor point, colour coded for simplicity and includes an extension pole for remote attachment. Included is the Grabba for rapid rescue from rope safety lines or fall arrest blocks.

Kit Contains

– Upper and lower pulleys
– Gotcha™ Frog
– Attachment pole
– Rope controller
– Australian Standards rescue rope
– Rope Grabba (for inertia reels)
– Attachment sling
– Karabiners
– Back pack gear bag
Gotcha Original Rescue Kit


Codes Capacity in High Anchor Mode Capacity in Low Anchor Mode Weight of Kit
Gotcha-KIT-0 (50) Up to 17m Up to 13m 7kg
Gotcha-KIT-75 Up to 25m Up to 19m 9kg
Gotcha-KIT-100 Up to 34m Up to 26m 11kg
Gotcha-KIT-150 Up to 51m Up to 39m 15kg
Gotcha-KIT-200 Up to 68m Up to 52m 19kg

Gotcha Original Thumbnail

Click to view data sheet

SpanSet 4050 5.1 confined space access and retrieval pulley system with automatic brake

The SpanSet 4050 confined space rescue and access pulley system features an automatic brake should the operator let go of the control rope or lose control of the descent. The braking action is instantaneous once the over-speed is detected, while being forgiving enough not to interrupt normal descent operations. The lifting function is greatly enhanced by the 5:1 mechanical advantage which reduces fatigue, especially during recovery from deep confined spaces. Utilising AS 4142.3 rescue standard 11mm kernmantle rope the kit also comes with a rope grab/ascender for easier grip and can be easily locked off for continued suspension. It can be operated by the user or by a remote assistant which makes this unit an ideal confined space access and rescue device. 4050 Pulley System
4050 Thumbnail

Click to view data sheet


SpanSet 4040 4.1 confined space access and retrieval pulley system with automatic brake

The SpanSet 4040 confined space rescue and access pulley system features an automatic brake should the operator let go of the control rope or lose control of the descent. The braking action is instantaneous once the over-speed is detected, while being forgiving enough not to interrupt normal descent operations. The lifting function is greatly enhanced by the 4:1 mechanical advantage which reduces fatigue, especially during recovery from deep confined spaces. Utilising AS 4142.3 rescue standard 11mm kernmantle rope the kit also comes with a rope grab/ascender for easier grip and can be easily locked off for continued suspension. It can be operated by the user or by a remote assistant which makes this unit an ideal confined space access and rescue device. 4040 Pulley System
4040 Pulley Data Sheet


 

Click to view data sheet

 

 


Gotcha™ CRD MP Rescue Kit

A constant rate 100m multi purpose descent device suitable for rescue and evacuation with remote attachment frog and pole. For operators who require evacuation and Gotcha™ post fall rescue in one kit.

This kit is suitable for evacuation and rescue from high structures where constant rate lowering and minimal user input are required.

It is also suitable for rescue from vertical situations where you can access the casualty with the Gotcha™ pole and frog.

Kit Contains

– Gotcha™ Frog
– Attachment pole
– Rope descent and rescue controller
– Kernmantle rope
– Attachment sling
– Karabiners
– Back pack gear bag

Codes Height Capacity Raise and Lower Capacity Weight of Kit
Gotcha CRD MP 50 50m Yes 7kg
Gotcha CRD MP 75 75m Yes 9kg
Gotcha CRD MP 100 100m Yes 11kg
Gotcha CRD MP 150 150m Yes 15kg
Gotcha CRD MP 200 200m Yes 19kg


Gotcha CRD MP

Click to view data sheet


Gotcha™ Shark Rescue Kit

The Gotcha™ Shark kit is designed for industrial climbers. The kit comes complete with an anchor sling capable of attaching to a wide range of structures and all terminations are sewn for security. There is an integral rope protector that can be set at any required location and the descent device allows the user to control their own rate or stop as required. In use, the rescuer attaches to one attachment, descends to the casualty, attaches them to the second attachment and cuts the casualty free using the unique bladeless cutter.

The kit is designed for loads up to 300kg, so when used for two persons still retains excellent levels of control.

This kit is commonly used by those working on structures such as towers or pylons where safe egress at the base is guaranteed.

Kit Contains

– Gotcha™ rope rider descender
– Rope sever wire cutter
– 100m Australian Standards rescue rope
– Attachment sling
– Karabiners
– Back pack gear bag

Code: Gotcha-SHARK-0
 Gotcha Shark Rescue Kit



Click to view data sheet


Gotcha™ Pole Top Rescue Kit

A kit for rescuing a casualty suspended by work position and fall arrest equipment when working on a pole.

Suitable for rescue from pole straps, flexible line fall arresters and work position lanyards. The casualty is raised to release their original attachment, but the kit does include a safety knife in case of difficulty when raising the casualty. The rescuer accesses the casualty in order to recover them.

The Gotcha™ Pole Top Rescue Kit is suitable for use on poles up to 15m high. No assembly is required by the user.

Kit Contains

– Rope belay controller
– 30m Australian Standards rescue rope
– Attachment sling
– Karabiners
– Rescue knife
– Gear bag

Code: Gotcha-PTRC-0
 Gotcha Pole Top Rescue Kit






Click to view data sheet


Gotcha™ 4000 Hauling Kit

This rescue/access pulley system with a 4:1 mechanical advantage features a single directional set of pulleys allowing efficient lifting and controlled lowering.

Can be locked off for prolonged suspension, be self operated or by a second person.

Kit Contains

– 4000 Rescue pulley system
– 50m of Australian Standards rescue rope
– 2 x K1 Karabiners
– 2 x 2000 Round sling
– Lay flat gear organizer bag

Code: 4000
 4000 Pulley System


Click to view data sheet



Gotcha™ Tower Rescue Kit

The Gotcha™ TRK is a pre-assembled 100m kit that can be used for rescuing personnel from towers, masts and similar structures.

The kit includes enough components for a variety of rescue applications. This kit is commonly used by operators in the telecommunications and electrical industries.

Kit Contains

– 100m of Australian Standards rescue rope
– Double brake descender
– Micro hauler
– 2 x Black Snake attachment slings
– 4 x K4 karabiners
– 3 x RP012 single pulleys
– Single yoke
– Dual yoke H1Alu
– Back pack lay flat gear bag

Code: Gotcha-TRK-0
 Tower Rescue Kit



Click to view data sheet



Red Pro Rescue Kit

The Red Pro is a pre-assembled 100m kit that can be used for personal evacuation, assisted evacuation or rescue of a casualty from high or remote locations.

The kit comes complete with an anchor slings capable of attaching to a wide range of structures, all terminations are sewn for security, the descent device operates automatically at a constant speed requiring no input from the user and can also be used for raising a casualty if required.

This kit is commonly used by wind energy access technicians and general operators looking for versatility in a kit. The unit comes in a sealed weatherproof bag and a sturdy SKV box.

Kit Contains

– Rope descent and rescue controller
– 125m rope
– 3 x Attachment slings
– 4 x Karabiners
– Edge protector
– Pulley
– Rope grab
– Hard box

Code: Gotcha REDPRO-SKV-125
 Red Pro Rescue Kit

Click to view data sheet



Gotcha™ CRD Kit

The Gotcha™ CRD is a pre-assembled 100m kit that can be used for personal evacuation, assisted evacuation of a casualty from high or remote locations.

The kit comes complete with an anchor sling capable of attaching to a wide range of structures, all terminations are sewn for s ecurity, and the descent device operates automatically at a constant speed requiring no input from the user.

This kit is commonly used by less experienced workers who occasionally access high level working platforms and require a simple rescue or evacuation solution.

Kit Contains

– Rope descent and rescue controller
– 100m rope
– Attachment sling
– Karabiners
– Back pack gear bag
Code: Gotcha-CRD-0
 CRD Rescue Kit

Click to view data sheet