ErgoABS 2000/50 with STF 750

EUR 84,10

VAT not included

ErgoABS 2000/50 with STF 750

High tension force with less muscle power

EUR 84,10

VAT not included

No stock.
Available within 10-15 Days

Item Number: 2003009
SSDE ERP Code: D001567
ErgoABS LC4000/50 1pc 8m
  • ERGO - Extended ratchet lever for better transmission of force
  • ABS - Controlled tension liberation
  • TFI - Integrated tension indicator
  • Coated with epoxy resin
  • Low-stretch, wear-resistant webbing with cord edge and marking stripes
  • Robust label, resistant to being pulled out, protected by plastic sleeve and webbing insert

Select Model


EUR 84,10

VAT not included

No stock.
Available within 10-15 Days

...

Extended Ratchet Lever

Better power transmission and more ergonomic

The extended lever not only allows the user to achieve increased pre-tensioning forces can be achieved with markedly less muscle power.

...

"Anti-Belt-Slip" procedure

Controlled tension liberation

The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.

...

Tension Force Indicator

Show the pre-tensioning force achieved

With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.

...

Self-locking ratchet lever

Prevents unintetional opening

The ratchet opening during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.

...

Double Slider

Safe in the intermediate phase when tensing

Secures in the intermediate stage when tensioning the webbing. Two sliders engage in an existing sprocket in "smaller steps".

...

Reinforced edges

Longer service life and lower costs!

Webbing with the reinforced edge is more resistant to wear and abrasion.

...

Precision strap

Low elasticity of the strap

Less stretch maintains more tension and reduces the need for tension readjustment.

...

Protective sleeve label

optimally protected, reinforced with selvedge

In addition to the tear-resistant design with a fabric lining, a robust plastic sleeve perfectly protects the writing from abrasion and dirt. The webbing insert, equipped as standard, also prolongs the service life.

TFI at adjustable end

When it comes to the pre-tensioning forces in your lashing strap systems, you need to make some careful calculations. According to DIN EN 12195-1:2004 you may usually only take 50% of the pre-tensioning force of the fixed end into account for the STF value of the fixed end and for the adjustable end. However, if you can prove that a higher pre-tensioning force is attained, you may take the actual force measured into account. This means, for example, that if you prove there are forces of 750 daN at both the adjustable end and the fixed end, you can incorporate this 1,500 daN of pre-tensioning force into your calculation. This is also enabled by our unique aid, the TFI, which can also be used at the adjustable end. By means of a special adaptor , the TFI can be integrated with all current end fittings. In addition, SpanSet has specially designed a delta hook to which the TFI can easily be attached. This results in an additional cost saving. When using the TFI, the STF that can be proven is significantly higher than that indicated on the label. This means that you save money when loading and unloading, as you need less lashing equipment.

Product Technical Information


  • Surface Coating: Epoxy
  • Standard Tension Force:
  • Standard Tension Force (with TFI):
  • Norms: EN 12195-2: 2001
  • Dimension L1: 8 m
  • Webbing Width B: 50
  • Dimension L2:
  • Dimension L3:
  • Ratchet Component: 927 RB ERGO ABS LC25kN 50mm BL
  • Label Protection: Yes
  • Colour: Blue
  • Webbing Material: 100% Polyester, thermofixed and low-stretch
  • Ratchet Type: Pull-down
  • Tension Force Indicator (TFI): Yes
  • Packaging Unit (PU): pcs
  • Packaging Unit (PU) Content: 1
  • Length: 8 m

Product downloads and manuals


Instructions - Lashing Straps
(de de_CH en es fr it nl)
Download

Technical Drawings



Item Number Item Name Lashing End Fitting Component Lashing Type Lashing Capacity
2003009
SSDE ERP Code: D001567
ErgoABS LC4000/50 1pc 8m One-Piece lashing
No
One-piece 4000 daN
2003506
SSDE ERP Code: D003546
ErgoABS LC2000/50/STF440 2pc 8m SHD Delta with Triangle hook
SHD-50
Two-piece 2000 daN
2003507
SSDE ERP Code: D003547
ErgoABS LC2000/50/STF440 2pc 8m DJH Double J-Hook
DJH-50
Two-piece 2000 daN
2004018
SSDE ERP Code: D003549
ErgoABS LC2000/50/STF440 2pc 8m DJHS Double J-Hook Safety Latch
DJHS-50
Two-piece 2000 daN
2004019
SSDE ERP Code: D003551
ErgoABS LC2000/50/STF440 2pc 8m RH Rave hook
RH-50
Two-piece 2000 daN