XCut™ Protective Sling Protection for Increased Sling Protection
XCut™ sleeve is a woven protective sleeve made from UHMPE [Ultra High Molecular Polyethylene] for lifting slings and roundslings, which offers the best protection for your textile lifting gear against cuts made by sharp edged loads. 

Rotating and turning loads is also no problem for XCut™ sleeve, and the special rib structure of the sleeve design makes it easier for the lifting gear to slide inside the sleeve. XCut™ sleeve protects the lifting sling even when a relative cutting motion takes place, which can occur when a load is raised. 

The flexible sleeve construction can also be easily positioned on the sharp edge in confined spaces. During the lifting process, the protective sleeve is placed firmly on the edge of the load, while the lifting equipment within the sleeve continues to move freely. A basic prerequisite for lifting and rotating sharp-edged steel, for example. 


Simply better and stronger! Three good reasons for using the new XCut™ sleeve. The optional center seam simplifies the use of the XCut™ sleeve when lifting with round slings using both legs [shown below in Fig. 4]. 

Fitted across both legs of the roundsling, manual adjustment is not required and the two legs are bound together in such a way that the sleeve cannot be removed. Take advantage of longer service lives, additional safety and the variety of combinations with different lifting slings! 


XCut