Create an accountPowerStar Lifting belts
- Raised sewn-on load capacity indication
- Tear-resistant label covered with a protective sleeve
- Optional fitting with an RFID transponder
- Full-surface loop reinforcement protects against chafing in the crane hook
- Edge reinforcement through woven-in high-tech yarns as wear protection
| Product Name | PowerStar Lifting belts |
|---|---|
| Product Headline | PowerStar Lifting belts out of polyester, with reinforced loops |
| Product description long 1 | Webbing made of 100% polyester, with integrated edge protection. Loops reinforced Label tear-proof label with protective tube
PowerStar lifting straps from Spanset® are made of high-strength polyester yarns. In addition, a transparent polyurethane coating offers up to 3-fold increased protection against abrasion and wear. In addition, the integrated edge protection makes the lifting belts more durable. In our high-performance products, enormously abrasion-resistant high-tech yarns made of spun black yarn are woven into the outer area of the belts. They form a clearly visible additional protection against chafing at the belt edge. The PowerStar lifting belts are equipped with a protected, tear-resistant label. For additional application safety, the load capacity information is sewn onto the belt. This means that the load capacity is still legible even if the sling is heavily soiled. |
| Label Protection | Yes |
|---|---|
| Norms | EN 1492-1: 2000 |
| Belt Layers | 2 |
| Main Material | Polyester |
| Packaging Unit (PU) Content | 1 |
Flat sling loop reinforcement
Flat sling loop reinforcement
Added protection against abrasion
Loops have to withstand a great deal of stress during lifting, hooking in and hook- ing out. The solution: loop reinforcement made of high-performance fibres. Thanks to the robust fibre layer, the load-carrying fabric is much more resistant to abrasion, thus prolonging its service life.
Reinforced edges
Reinforced edges
Resistant to wear and abrasion
Extremely hard-wearing high-tech black spun yarn is woven into the edges of the slings. They provide an easily recognisable protection against chafing on the edge of the strap. Your benefit: longer service life and lower costs!
Weaving pattern
Weaving pattern
Measurable load capacity
With these flat slings you can „measure“ the load capacity. The weaving pattern of the strap changes every 30 mm, and each „strip“ indicates a nominal carrying capacity of 0.5 t per layer, e. g.: 2-ply flat sling, 90 mm wide = 3 x 30 mm x 2 layers = 3 t load capacity
RFID optional
RFID optional
Attachment strap for retrofitting
All SpanSet lifting gear can be fitted with an RFID transponder for asset management with IDXpert. An attachment loop sewn into the lifting gear makes for easy mounting of the transponder
Protective sleeve label
Protective sleeve label
Optimally protected, reinforced with a lining
In addition to the tear-resistant design with a fabric lining, a robust plastic sleeve perfectly protects the writing from abrasion and dirt. In lifting gear fitted with an RFID transponder, the transponder is integrated into the protective sleeve and is tear-resistant.
Woven load capacity indicator
Woven load capacity indicator
Easy to read even when dirty
Speed is often of the essence in everyday work. To make sure you always use the right round sling, the load capacity indicator is firmly woven into the sleeve and can be read even when the sling is very dirty.