TLH sheet metal clamp

TLH sheet metal clamp

Lifting horizontal plates or sheets (single or bundled) circular plates or fabricated assemblies

Item Number: 2016642
TLH sheet metal clamp 500 60mm
sheet metal clamp, WLL 0.5t, opening 60mm
  • Elements can be lifted individually or bundled together
  • Also available with a gripping range of 0-120 mm and 0-150mm on request
  • Epoxy resin heat coating

Select Model

Please contact customer service for purchase or more information

For horizontal lifting. Can only be used in pairs. Can be used in an
angle of inclination from a minimum of 22.5° to a maximum of 30°. On request also available with a gripping range of 0-120 mm and 0-150mm.
available.

Recommendations for Use

Use in pairs only The plate or piece to be lifted must always be driven home into the throat of the clamp The load must be rigid enough not to bend during handling operations. Operate at an angle of inclination of minimum 22.5° to maximum 30°. Slings and clamps must be aligned vertically in the same way.

Product Technical Information

  • Jaw Opening Width
    0-60 mm
  • Safety Factor
    3:1
  • Main Material
    Steel
  • Norms
    EN 13155
  • Packaging Unit (PU)
    pcs
  • Temperature Range
    -20° C to + 80° C
  • Packaging Unit (PU) Content
    1
  • Colour
    Yellow

Technical Drawings