Wire Ropes with Loop and sliding Hook

Wire Ropes with Loop and sliding Hook

With loop and sliding hook with safety latch

Item Number: 2009676
Wire Rope Loop with Sliding hook 10mm 800
Wire Rope, Loop, with Sliding hook, 10mm, WLL 800kg
  • A wide variety of designs and components
  • Exclusively tested pressing sleeves
  • Galvanised quality wire ropes
  • Produced in Switzerland
  • Sliding hook with safety latch

Select Model

Minimum value: 0.60 , Maximum value: 100.00 , Step: 0.10
Please contact customer service for purchase or more information

In our wire rope production facility, we manufacture customised wire rope assemblies and wire rope slings for you in accordance with the applicable EN regulations.

We only use tested crimp sleeves and galvanised quality wire ropes so that you can rely on every single Spanset® wire rope.

The designs and load capacities comply with EN 13414-1 and the CE Machinery Directive.

Recommendations for Use

Do not use damaged wire ropes and slings with defects, such as wire breaks, bulges, bruises, kinks, severed core, heavy wear, rust damage or others. Do not exceed the specified load carrying capacity (WLL). Do not strike at a tilt angle exceeding 60°. Do not use wire ropes with broken strands. Do not use in contact with chemicals. Sling ropes may only be used for lifting and transporting loads and only by instructed persons. The regulation on the safe use of cranes (Crane Regulation) must be observed without fail (Suva-Form.1420. d).

Product Technical Information

  • Hook Component
    26443
  • Main Material
    Steel
  • Norms
    EN 13414-1
  • Packaging Unit (PU)
    pcs
  • Temperature Range
    -40° C to + 100° C
  • Packaging Unit (PU) Content
    1