KS sheet metal clamp
KS sheet metal clamp
Lifting and turning of plates, parts, finished assemblies, steel frames and more
Item Number: 2009378
KS sheet metal clamps 750
sheet metal clamps, WLL 750kg
- Horizontal and vertical use
- Manual unlocking
- Epoxy resin heat coating
- Marking on one side only
Select Model
Please contact customer service for purchase or more information
The specified load capacities apply to the single direct stop type straight pull. Reduction of the load capacity depending on the sling angle.
Recommendations for Use
Never lift more than one item at a time.
This product will leave a mark on the load
Not suitable for creating permanent joints
Do not use for fragile loads
The plate or piece to be lifted must always be driven home into the throat of the clamp
The minimum weight of lifting load should be equal to 5% of the clamp’s WLL (eg if clamps WLL is 1000 kg, then minimum weight is 50 kg). This value is given for a clamp in perfect working order and respecting conditions of use and recommendations.
Some stainless steels are particularly abrasive; closely check the condition of the cam’s teeth in this case
Product Technical Information
-
Safety Factor
3:1 -
Main Material
Steel -
Norms
EN 13155 -
Packaging Unit (PU)
pcs -
Temperature Range
-20° C to + 100° C -
Packaging Unit (PU) Content
1 -
Colour
Yellow
Technical Drawings
