Lashing strap type AK23 with ratchet and wire hook

As low as CHF33.60
In stock
SKU
21263
Two-part 35 mm lashing strap, with ratchet, LC 1'000 / 2'000 daN
  • Self locking ratchet lever
  • Tear resistant label
Datasheet
Product NameLashing strap type AK23 with ratchet and wire hook
Product HeadlineTwo-part 35 mm lashing strap, with ratchet, LC 1'000 / 2'000 daN
Product description long 1

Ratchet made of high-strength steel, galvanised (01804). With wide lever, also suitable for working with gloves.

Webbing 100% polyester, 35 mm wide, orange, heat-set and low-stretch.

End fitting Wire hook

 

Self locking ratchet lever

For maximum safety when lashing, Spanset® has developed the self-locking ratchet lever. When lashing, pull the integrated functional slider. When the ratchet is closed, the ratchet, automatically engages in the locking position. An unintentional opening of the ratchet while driving is effectively ruled out - even in the event of strong vibrations and jolting movements.

Product description long 2

Folding label

A foldable label, which is sewn in two layers and thus
more resistant to tearing. The lettering is better protected from abrasion on the inside. The label is shorter due to the central fold and thus offers less surface for shear forces. The folding label is more valuable than a standard label sewn in on one side.

Recommendation for UseLashing only, not for lifting, Protect against sharp edges, hot surfaces and chemicals
Datasheet
Lashing TypeTwo-piece
Lashing Capacity1'000 daN
Ratchet TypePush-up
Standard Tension Force240 daN
Tension Force Indicator (TFI)No
Label ProtectionNo
Surface Coatinggalvanized
NormsEN 12195-2
Colourorange
Webbing Material100% Polyester, thermofixed and low-stretch
Lashing End Fitting Component2001678
Main MaterialPolyester
Dimension L20.4 m
Webbing Width B35 mm
Packaging Unit (PU) Content1

Self-locking ratchet lever

Self-locking ratchet lever

Self-locking ratchet lever

Prevents unintetional opening of the ratchet

Self-locking ratchet lever

For maximum security during lashing operations we developed the self-locking ratchet lever. When lashing, the integrated functional slider is pulled down. When the ratchet is closed, it automatically locks into place in the lock position. Uninetnional opening of the ratchet during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.

Folded label

Folded label

Folded label

to protect against damage with information sewn inside

Folded label

SpanSet cam buckle straps are fitted with a folded label which is sewn on in two layers and is thus tear-resistant. The writing on the inside is protected agains abrasion. The label is made shorter by the fold in the middle and is thus exposed less to wind and shearing forces.

We found other products you might like!