Lashing strap type AK50 with ROBUSTA ratchet and wire hook

As low as CHF93.60
In stock
SKU
21270
Two-part 50 mm lashing strap, with ratchet, LC 2'500 / 5'000 daN
  • Epoxy resin coated ratchet
  • Pre-tensioning force indicator TFI
  • Self-locking ratchet lever
  • Tear-resistant quality label with protective hose
Datasheet
Product NameLashing strap type AK50 with ROBUSTA ratchet and wire hook
Product HeadlineTwo-part 50 mm lashing strap, with ratchet, LC 2'500 / 5'000 daN
Product description long 1

Our ROBUSTA ratchet made of high-strength steel, with fine serration, is particularly robust. Thanks to the high-quality epoxy resin coating, the ratchet is additionally protected against rust formation. We place on quality in every single part. The ratchets are first galvanised, then chromated and coated with an impact-resistant epoxy resin coating.

Less effort thanks to fine toothing
The ROBUSTA ratchet is not only very durable, it also offers the user a clear advantage in use. Compared to a conventional toothing, the fine toothing enables higher pretensioning forces with less effort.

Product description long 2

With TFI 500 as standard
The SpanSet ROBUSTA pressure ratchet is equipped with a TFI 500 on the short part as standard. On the short part, whereby a pretensioning force of 500 daN can be reached and can be read off.

Self locking ratchet lever

For maximum safety when lashing, Spanset® has developed the self-locking ratchet lever. When lashing, pull the integrated functional slider. When the ratchet is closed, the ratchet, automatically engages in the locking position. An unintentional opening of the ratchet while driving is effectively ruled out - even in the event of strong vibrations and jolting movements.

Epoxy resin coating

We attach great importance to quality in every single part. The ratchets are first galvanised, then chromated and coated with an impact-resistant epoxy resin coating. The ratchet is thus additionally protected against rust formation.

Robust protective hose label
In addition to the tear-proof finish of the fabric insert, a robust protects the label permanently from abrasion and dirt. The protective sleeve label is a great advantage because lashing straps with a missing or illegible label may not be used.

Recommendation for UseLashing only, not for lifting, Protect against sharp edges, hot surfaces and chemicals
Datasheet
Lashing TypeTwo-piece
Lashing Capacity2'500 daN
Ratchet TypePush-up
Standard Tension Force350 daN
Standard Tension Force (with TFI)500 daN
Tension Force Indicator (TFI) Component2001688
Tension Force Indicator (TFI)Yes
Label ProtectionYes
Surface Coatinggalvanized
NormsEN 12195-2
Colourorange
Webbing Material100% Polyester, thermofixed and low-stretch
Lashing End Fitting ComponentDouble wire hook
Main MaterialPolyester
Dimension L20.4 m
Webbing Width B50 mm
Packaging Unit (PU) Content1

Tension Force Indicator

Tension Force Indicator

Tension Force Indicator

Indicator to show the actual pre-tensioning force achieved

Tension Force Indicator

With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations. There are three variants of the TFI available, with 500 (green), 750 (red) and 1,000 daN (yellow). The use of a TFI at the adjustable and fixed end is particulary effective, as it can display a pre-tensioning force of 1,000, 1,500 and 2,000 daN. Consequently, less lashing equipment is required for load control, which accelarates loading and unloading and offers major economic advantages.

Self-locking ratchet lever

Self-locking ratchet lever

Self-locking ratchet lever

Prevents unintetional opening of the ratchet

Self-locking ratchet lever

For maximum security during lashing operations we developed the self-locking ratchet lever. When lashing, the integrated functional slider is pulled down. When the ratchet is closed, it automatically locks into place in the lock position. Uninetnional opening of the ratchet during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.

Folded label

Folded label

Folded label

to protect against damage with information sewn inside

Folded label

SpanSet cam buckle straps are fitted with a folded label which is sewn on in two layers and is thus tear-resistant. The writing on the inside is protected agains abrasion. The label is made shorter by the fold in the middle and is thus exposed less to wind and shearing forces.

Epoxy resin coating

Epoxy resin coating

Epoxy resin coating

Coating of chrome- and zincplated sheet steel ratchet

Epoxy resin coating

We place maximum value on quality in each individual element. The ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.