Lashing strap type ZE50 with ERGO ratchet, configurable

As low as CHF60.50
In stock
SKU
22194
Two-part 50 mm lashing strap, with ERGO ratchet, LC 2'500 / 5'000 daN
  • Pull ratchet for easier tensioning
  • Extended ratchet lever for better power transmission and more ergonomics
  • Self-locking ratchet lever
  • Tear resistant label
Datasheet
Product NameLashing strap type ZE50 with ERGO ratchet, configurable
Product HeadlineTwo-part 50 mm lashing strap, with ERGO ratchet, LC 2'500 / 5'000 daN
Product description long 1

Our reverse ratchet tensioners are a practical aid. The extended lever of the Ergo turnbuckles makes lashing much easier. You can achieve high pre-tensioning forces with considerably less muscle power. The ratchet tensioners are even more ergonomic thanks to their extra-long lever, which is gentle on your back.

Extended ratchet lever

The extended lever not only means that higher pre- tensioning forces can be achieved, but it also but also makes lashing much easier. High pre-tensioning forces can be achieved with considerably less muscle power. Especially the pull ratchets with a long lever in particular are more back-friendly and meet ergonomic requirements better.

Self locking ratchet lever

For maximum safety when lashing, Spanset® has developed the self-locking ratchet lever. When lashing, pull the integrated functional slider. When the ratchet is closed, the ratchet, automatically engages in the locking position. An unintentional opening of the ratchet while driving is effectively ruled out - even in the event of strong vibrations and jolting movements.

Folding label

A foldable label, which is sewn in two layers and thus
more resistant to tearing. The lettering is better protected from abrasion on the inside. The label is shorter due to the central fold and thus offers less surface for shear forces. The folding label is more valuable than a standard label sewn in on one side.

Recommendation for UseLashing only, not for lifting, Protect against sharp edges, hot surfaces and chemicals
Datasheet
Lashing TypeTwo-piece
Lashing Capacity2'500 daN
Ratchet TypePull-down
Standard Tension Force350 daN
Label ProtectionYes
Surface Coatinggalvanized
NormsEN 12195-2
Colourorange
Webbing Material100% Polyester, thermofixed and low-stretch
Dimension L1 min0.48 m
Dimension L1 max100 m
Main MaterialPolyester
Webbing Width B50 mm
Packaging Unit (PU) Content1

Extended Ratchet Lever

Extended Ratchet Lever

Extended Ratchet Lever

for better power transmission and more ergonomic, gentle to the back

Extended Ratchet Lever

The extended lever not only allows the user to achieve increased pre-tensioning forces can be achieved with markedly less muscle power. In particular the pull ratchets with the long lever are gentler on the back and are more adapted to ergonomic requirements.

Self-locking ratchet lever

Self-locking ratchet lever

Self-locking ratchet lever

Prevents unintetional opening of the ratchet

Self-locking ratchet lever

For maximum security during lashing operations we developed the self-locking ratchet lever. When lashing, the integrated functional slider is pulled down. When the ratchet is closed, it automatically locks into place in the lock position. Uninetnional opening of the ratchet during transportation is thus effectively ruled out - eben when the load is exposed to strong vibrations and shaking.

Folded label

Folded label

Folded label

to protect against damage with information sewn inside

Folded label

SpanSet cam buckle straps are fitted with a folded label which is sewn on in two layers and is thus tear-resistant. The writing on the inside is protected agains abrasion. The label is made shorter by the fold in the middle and is thus exposed less to wind and shearing forces.