NoCut® Bumper
NoCut® Bumper
Protect quickly the the load and the sling
- Tested cut resistance
- Freely positioned on lifting gear
- Simple and ergonomic handling
Optimised process technology
Increase service life and safety
Improved cut protection, simplified handing and stronger material stability.
Free positioning
Protection at exactly place
Can be freely positioned over the lifting sling and offers protection at exact place where the sharp edge is connected.
Lightweight
Simpler and Ergonomic
The lightweight construction makes for simple and ergonomic handling.
Certified safety
A high level of operational safety based on defined edge radii – DEKRA certified.
Label
with handling instructions
NoCut products are marked with a label containing the handling instructions and the general product information.
The newest addition to the NoCut product family
- NoCut bumper also combines the most simple handling with a stronger fabric structure and improved cut protection.
- During the lifting process, the NoCut bumper can be placed at critical points between the load and the lifting sling quickly and without fastening. Depending on use, the cut protection can be used in the crosswise or longitudinal direction.
- The NoCut bumper is composed of a NoCut sleeve with interior layers of webbing which increase the radius at the deviating and attachment points of the load.
It is always used if the NoCut sleeve or NoCut pad cannot be used due to difficult to access locations.
Technical Drawings
