SpanSet Apps
SpanSet apps
for lifting and lashing
Calculate – optimize – secure
Secure lashing and lifting – with the intelligent SpanSet apps
SpanSet's practical apps make it much easier for you to secure your load and lift loads.
Whether you want to calculate the lashing straps for safe transport or determine the required load capacity of your lifting device, these user-friendly apps provide you with fast and accurate results. With just a few entries, you can precisely adjust important parameters.
Both applications comply with current standards and therefore guarantee reliable and safe use—anytime, anywhere.
Advantages of the apps
- Time savings - Fast and precise calculations for lashing and lifting work.
- Simplicity - Easy-to-use user interface, via sliders or direct input of important parameters.
- Safety - calculations based on current standards ensure maximum protection.
- Available for Android and iOS
Lifting App
to determine the load capacity
The app helps determine the necessary lifting equipment for all lifting and transport tasks.
- Can be used for textile slings (lifting slings and round slings), chains, and wire ropes.
- Easy to use: Simply enter the weight of the load and the type of sling.
- There are 14 different types of slings to choose from.
- The angles can be entered manually, calculated, or measured using sensors in the smartphone.
- Based on the exact angle of attachment, the app precisely determines the actual load capacity required for the attachment device.
Calculation of load-bearing capacity in accordance with DIN EN 1492-2 and 1492-1:2009.
Our app has been successfully tested by TÜV SÜD for its calculation function: Prüfbericht
Lashing force app
on load securing
The app allows you to calculate the lashing straps required for efficient load securing.
- Enter the coefficients for sliding friction, angle of inclination, and preload forces, as well as the acceleration in the direction of travel and the K factor.
- The number of lashing straps required for a specific pre-tensioning force (STF) is displayed directly.
- The angle of inclination can be calculated or displayed by the position sensors in the smartphone.
- The load securing values can be calculated in accordance with the guidelines of VDI 2700 ff. and/or DIN EN 12195.
- Additional option for documenting the load distribution plan.
Calculation in accordance with the guidelines of VDI 2700 ff and DIN EN 12195.
Our app has been successfully tested by TÜV SÜD for its calculation function: Prüfbericht
Altitude safety apps
Fall height calculator
The app provides information on whether the fall height is sufficient for various application scenarios.
The technician or worker can easily perform the calculation using their smartphone and then know how effective their protective equipment is.
inspector
The app shows you what to look for during regular visual inspections of safety belts, lanyards, and carabiners.
When downloading, please select the operating system for which you need the app.