6x19 Class IWRC

6x19 Class IWRC

  • The rope on cable tool drilling equipment is used for raising and lowering the drilling tool on a single fall system
  • The ropes are manufactured non preformed to resist the effect of shock loading during normal drilling operations
  • The construction normally used is 6x19 Seale (9/9/1) with a synthetic core
  • Left hand lay ropes are used to counteract tool rotation.
  • Galvanised quality wire ropes

All wire rope that we supply are only high quality and certified products according to International Standard of BS EN 12385, API Spec 9A, ISO 2408 and SNI.

These wire Rope are manufactured by a company that has ISO 9001:2015 certification and also have 3rd party certification from ABS, DNV-GL and Lloyds. 

Recommendations for Use

Do not use damaged wire ropes and slings with defects, such as wire breaks, bulges, bruises, kinks, severed core, heavy wear, rust damage or others. Do not exceed the specified load carrying capacity (WLL). Do not strike at a tilt angle exceeding 60°. Do not use wire ropes with broken strands. Do not use in contact with chemicals. Sling ropes may only be used for lifting and transporting loads and only by instructed persons. The regulation on the safe use of cranes (Crane Regulation) must be observed without fail (Suva-Form.1420. d).