Ratchet Lashing ABS 50mm, LC 25kN
Ratchet Lashing ABS 50mm, LC 25kN
Robust and durable ratchet with progressive release, for safe release of tension and no load tipping
- Manufactured in accordance to EN 12195-2
- Made from highest grade material
- Unique Serial Number on each single product for traceability and inspection record
- Optional accessories are available to improve load securing application
- Supplied with Certificate of Conformance, Product Identification Label and User Manual book
- Available in standard and customized length
Select Model
Tension Force Indicator
Show the pre-tensioning force achieved
With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.
"Anti-Belt-Slip" procedure
Controlled tension liberation
The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.
Protective sleeve label
optimally protected, reinforced with selvedge
In addition to the tear-resistant design with a fabric lining, a robust plastic sleeve perfectly protects the writing from abrasion and dirt. The webbing insert, equipped as standard, also prolongs the service life.
Epoxy resin coating
Maximum ratchet protection
Ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.
Product Technical Information
-
Lashing Capacity
2500 daN -
Lashing Type
Two-piece -
Standard Tension Force
450 daN -
Webbing Width B
50 mm -
Ratchet Type
Push-up -
Anti Belt Slip (ABS)
Yes -
Tension Force Indicator (TFI)
Yes -
Surface Coating
Epoxy -
Webbing Material
Polyester, thermofixed and low-stretch <4% -
Label Protection
Yes -
Norms
EN 12195-2: 2001 -
Handle Type
Standard -
Packaging Unit (PU)
pcs -
Packaging Unit (PU) Content
1 -
Colour
Yellow
Technical Drawings
