Ratchet Lashing Ergo ABS 50mm, LC 25kN
Ratchet Lashing Ergo ABS 50mm, LC 25kN
- Manufactured in according to EN 12195-2
- Tensioning device equipped with Anti Belt Slip (ABS) feature that make the ratchet released gradually
- Tensioning Device coated with epoxy resin that effectively protects the ratchet from the effect of weather, prevent rust and ensures a long service life
- Tensioning Device equipped with double slider for optimal power generation due to tensioning in small step
- Tensioning Device equipped with self-locking feature that prevents unintentional opening while being transported and thereby increases the safety of all road users
- Webbing equipped with edge protection to protect from wear, UV protection and webbing has maximum stretching 4%
- Tensioning Device design with extra-long lever for high pre load force is ergonomically attainable
Select Model
Tension Force Indicator
Show the pre-tensioning force achieved
With the TFI you can read off the pre-tensioning forces achieved in the lashing system when tying down loads and use this information in load control calculations.
"Anti-Belt-Slip" procedure
Controlled tension liberation
The ABS system was developed for loads with a risk of tipping and allows the user to release the pretension in small steps. The lashing can also be opened completely.
Protective sleeve label
optimally protected, reinforced with selvedge
In addition to the tear-resistant design with a fabric lining, a robust plastic sleeve perfectly protects the writing from abrasion and dirt. The webbing insert, equipped as standard, also prolongs the service life.
Epoxy resin coating
Maximum ratchet protection
Ratchets are first zinc-plated, then chrome-plated and coated with a shock-resistant epoxy resin coat which additionally protects the ratchets from e.g. rust.
Product Technical Information
-
Lashing Capacity
2500 daN -
Lashing Type
Two-piece -
Standard Tension Force
500 daN -
Webbing Width B
50 mm -
Ratchet Type
Pull-down -
Anti Belt Slip (ABS)
Yes -
Tension Force Indicator (TFI)
Yes -
Surface Coating
Epoxy -
Webbing Material
Polyester, thermofixed and low-stretch <4% -
Label Protection
Yes -
Norms
EN 12195-2: 2001 -
Handle Type
Standard -
Packaging Unit (PU)
pcs -
Packaging Unit (PU) Content
1 -
Private Label
Yes -
Colour
Yellow
Technical Drawings
