Work Restraint System


Designed for safe access on top of vehicles and containers,providing a secure handhold as you move from the ladder onto the system.

The STOPPA system comes in two parts, hardware attached to the vehicle/container and a Belt providing the user interface.

The hardware is formed of a pair of anchor Lines to tested to EN795 and the V–shaped Lanyard tested to EN354 and then the Belt, which is CE certified to EN358.

Who is STOPPA intended for?

Every day, drivers and operatives suffer injuries as a result of falls whilst working at height on vehicles. The STOPPA system enables safe access on to the top of a vehicle/container wherever it may be - at a remote site, on the roadside, in a workshop or at a depot.

  • Refuse Collection Vehicles – front and rear end loaders.
  • Road Tankers – including fuel and powder tankers.
  • Fire and Rescue Vehicles.
  • Containerised Generators and Chiller Units.
  • Modular Buildings.

More about STOPPA

Why use STOPPA?

The hardware remains permanently attached to the vehicle/container. Its low profile installation has little or no effect on the overall vehicle/container height, minimising the potential for impact damage and allowing containers to continue to be stacked.The belt can be worn whilst carrying out the work activities and stowed safely when not in use.

  •  STOPPA is a work restraint system ideal for vehicles, containers and other areas where fall prevention is needed.
  • Design and operation of the STOPPA reduces the risk of trips as well as falls.
  • All permanently installed parts are stainless steel.
  • No safety-critical moving parts are left exposed to the environment.
  • The belt is quick to fit and easily stowed when not in use.
  • The large ring on the lanyard provides an easy target and third point of contact for safe and easy transition to clip onto the system.
  • Secure and predictable attachment providing complete confidence for the user.

Find out about the rest of our lifelines


Vertical Lifeline System 

Offers market leading fall protection for work at height on any type of fixed industrial ladder or suitable vertical structures such as electricity pylons.

SecureClimb - Installation service >


Overhead horizontal Lifeline

Provide snag free travel along the installed lifeline and due to the rigid nature of the CAPCHA Workshop system, it can support heavier retractable type fall arrest devices without causing excessive sag in the lifeline under the device weight.

Capcha - Installation service > 


Horizontal Lifeline System

Designed to provide safe attachment for a team of up to 4 x 140kg operatives. Suitable for all roof types including concrete slab, profiled roof sheet, standsing seam and membrane roofs.

WorkSecure - Installation service >

SpanSet Certified Safety

Your partner for Height Safety , Lifting and Load control

Our team of experts will attend to your enquiry to offer you the best option